|
**Please Call for Current Pricing**
Paypal prices are not current
Thumbnail Shrinking Die Set - $495
Thumbnail
Shrinking Die Set for Hard Metals. Upper and Lower Dies: 3/4" Square
Shank, 2 5/8" Shank Length, 1.5" x 1.5" Square Head. Typical
Applications include Cold Rolled Steel, 6061-T3, 5052-H14, and Soft
Stainless Steel.
Click Here to See Demonstration Video
Urethane Upper Hammer Die - $175
Urethane
Upper Die: 3/4" Square Shank, 2 1/4" Shank Length, 1.5" Head Diameter.
Used in Combination with Steel Lower CP Die to Stretch and Smooth Sheet
Metal. Does Not Leave Hammer Marks. Use with High Crown Lower CP Die
(1.1" R, 0.875" R, 0.75" R, etc.) for Rapid Stretching and Doming
operations.
Click Here to See Demonstration Video
Shrinking Die Set for Hard Metals - $290
Shrinking
Die Set for Hard Metals. Upper Die: 3/4" Square Shank, 2 1/4" Shank
Length, 1.5" Head Diameter. Lower Die: 1.5" Head Diameter, fits
standard CP Lower Tool Holder. Typical Applications include Cold Rolled
Steel, 6061-T3, 5052-H14, and Soft Stainless Steel.
Click Here to See Demonstration Video
Flanging Die for Hard Metals - $85
Flanging Die for Steel and Harder Metals. Use in Combination with Upper Shrinking Die for Hard Metals to Create a Flange on
a Curved Compound Surface.
Shrinking Die Set for Soft Metals - $225
Shrinking
Die Set for Soft Metals. Upper Die: 3/4" Square Shank, 2 1/4" Shank
Length, 1.5" Head Diameter. Lower Die: 1.5" Head Diameter, fits
standard CP Lower Tool Holder. Typical Applications include Aluminum
3003-H14, 1100-H14, Copper, Brass, and Thin Soft Stainless Steel.
Click Here to See Demonstration Video
Flanging Die for Soft Metals - $70
Flanging Die for Aluminum and Softer Metals. Use in Combination with Upper Shrinking Die for Soft Metals to Create a Flange
on a Curved Compound Surface.
CP Linear Stretch Die Set - $270
Set Includes (from left to right) #0, #1, & #2 Linear Stretch Dies. 4140 Alloy Steel, Heat Treated to 60+ Rockwell C.
Used in Conjunction with Flat Upper Hammer Die for Flanging or Creating Reverse Curve/Saddle Shapes in Hard or Soft Sheet
Metal.
#0 = full radius, #1 = 0.100" wide flat, #2 = 0.180" wide flat. 0.812" Diameter Shank to Fit CP Die Holder.
Note: #0 is most aggressive (faster), #2 is least aggressive (slower, but allows for more control).
Note: Use adhesive tape around die body and die holder to keep die from rotating.
Individual Linear Stretch Dies
CP Linear Stretch Die #0 - $95
CP Linear Stretch Die #1 - $95
CP Linear Stretch Die #2 - $95
Pullmax Profile Universal Die Holders - $235.00
Pullmax
Profile Universal Die Holders. Build your own Pullmax Tooling from
Aluminum, Delrin, Wood, etc. and mount them in these Universal Tooling
Adapter/Die Holders. Screw and Pin Type. Accepts 1/2" thick material
(Aluminum, Plastic, Wood, and Steel). Cut to the profile you wish to
shape. Fits Pullmax P5, P6, and other models of reciprocating power
hammers that accept 19mm (3/4") square tool shanks. 3" shank length, 2
1/2" wide holder, slot is 1/2" wide x 11/16" deep. 1/4" diameter
locking pins and 1/4-20 stainless steel setscrews are included.
Please Note: The aluminum profile dies and adjustable back fence shown
in the photo are for demonstration purposes only and are not included
Pullmax Tool Post Mounted Back Fence - $225.00
Pullmax
Tool Post Mounted Back Fence. Clamps to lower tool post. Provides
adjustable back fence for beading and other operations. Fits 3/4"
square tool posts. Allows for up to 6" of spacing from tool to fence.
Note: The beading dies are shown for demonstration purposes only and are not included.
Round Beading Die Set - $225
Pullmax
Style Round Beading Dies. Includes both Upper and Lower Dies. 19 mm
(3/4") square shanks. Puts 3/4" wide Round Bead in sheet metal panels
(steel, aluminum, soft stainless, etc.). Creates 3/4" Round Beads up to
3/8" deep. Shank Lengths - pusher: 2 1/2", receiver:4" Fits Pullmax P5,
P6, and other models of reciprocating power hammers that accept 19mm
(3/4") square tool shanks. Also available for Pullmax P21, P200
(specify shank length)
Note: Also available in 5/8" and 1/2" Round Bead sizes. Please
specify in a note if you want one of these optional sizes. Otherwise
you will receive the 3/4" Round Bead size.
Please Note: The adjustable back fence shown in the photo is for demonstration purposes only and is not included.
This set is available in the following square shank sizes: 7/8",
3/4", 5/8", and 14mm. Please specify your required shank size when
ordering. *Note: Shank Length for 14mm square shank size is 1 1/2" for
both pusher and receiver.
|
